How to Create Bootable USB Installer for macOS High Sierra via UniBeast

How to Create Bootable USB Installer for macOS High Sierra via UniBeast

In this article, I am going to show you how to create bootable USB installer for macOS High Sierra via Unibeast. If you want to install macOS High Sierra wether on your Mac computer or PC, you can use this method to create a bootable USB installer for macOS High Sierra. All you need a working mac running macOS 10.11 or higher. Also, if you don’t have a Mac, then you can install it on VMware or VirtualBox on Windows or follow this guide to create macOS High Sierra bootable USB installer on Windows 10.

Create Bootable USB Installer for macOS High Sierra via UniBeast

Step #1. Download the latest version of macOS High Sierra from App Store on your Macintosh.

Step #2. Download Unibeast from Tonymacx86, you need to create an account to download it.

Step #3. Connect your USB device to your Mac then go to Disk Utility and erase it. Make sure to select the format to Mac OS Extended (Journaled) and the Scheme to GUID Partition Map.

How to Create Bootable USB Installer for macOS High Sierra via UniBeast

Erase USB Device

Note: You need 8 GB or higher USB device, and for better performance USB 3.1 is recommended.

Step #4. Now Open UniBeast and click Continue.

Welcome to UniBeast Page

Step #5. Click Continue again.

Important Information Page

Step #6. Click Continue and agree to the terms and conditions.

How to Create Bootable USB Installer for macOS High Sierra via UniBeast

Agree to the terms and Conditions

Step #7. Select the USB device that you erased in step 3 and click continue.

How to Create Bootable USB Installer for macOS High Sierra via UniBeast

Select a Destination

Step #8. Select macOS High Sierra image that you downloaded in step 1 just by click on High Sierra.

How to Create Bootable USB Installer for macOS High Sierra via UniBeast

Select macOS High Sierra OS

Step #9. For the Bootloader configuration, select UEFI Boot Mode.

How to Create Bootable USB Installer for macOS High Sierra via UniBeast

Choose Bootloader Configuration

Step #10. On the optional graphics configuration, don’t select anything. Just click Continue.

How to Create Bootable USB Installer for macOS High Sierra via UniBeast

Graphics Configuration

Step #11. Click Continue on the Verify Installation Options.

How to Create Bootable USB Installer for macOS High Sierra via UniBeast

Verify Installation Options

Step #12. To confirm you need to type your username password.

How to Create Bootable USB Installer for macOS High Sierra via UniBeast

Give Unibeast Permission to Create Bootable USB Installer

Step #13. Wait for a while for Mac to write maOS high Sierra on the USB device and make it bootable. Also, the time depends on your USB device type.

USB Installer created Successfully

Related: How to Create macOS High Sierra bootable USB Installer on Windows 10.

It was all about, creating bootable USB installer for macOS High Sierra via Unibeast. If you faced any problem, hit a comment down below this post. We’re happy to get your suggestions.

I am the CEO of wikigain.com and a network instructor. Here is my online pictorial notebook. I would like to write and share my experience through this website for computer enthusiasts, how to guides and technology geeks.

7 Comments

  1. judi bandarq Reply

    Excellent post. I was checking constantly this weblog and I am inspired!
    Extremely useful info specially the closing section 🙂 I maintain such information much.
    I was looking for this particular information for a very lengthy
    time. Thanks and good luck.

  2. Vicente Gonzalez Reply

    I followed all the steps but repeatedly it reports: “There was an error creating your unibeast drive: Copy of apfs.efi failed”. I can’t seem to find out what the problem is. Any suggestions?

  3. Tushar Thakur Reply

    Guys pls tell me how to download MAC os High Sierra without apple store if any of you have an orignal DMG link so please share

  4. Israel Santiago Reply

    i tried making an istaller with vmware but it fails to create the usb drive with unibeast and manually trough terminal

  5. Milton Jhon Reply

    mi MB: Intel DZ68DB
    Core I7 3770K
    Ram 8GB bus de 1600
    Vmware en SSD Intel de 256GB
    Nvidia geforce 710
    HDD 1 TB
    HDD 2 TB

  6. Milton Jhon Reply

    Estoy creando el usb installer de high sierra en una maquina vmware 14.1.1 , con el proceso de unibeast y se quedo en Installing Bootloader mas de 2 horas. tengo USB 3.1 conectado a un puerto USB 2.0 del PC.
    Alguna ayuda de su parte por favor.

    Ya lo intente con USB Kingston 3.0 de 32GB, Kingston 2.0 de 16GB, Memoria 2.0 de 16GB y en todas estas memorias no terminaba el proceso, por ahora me encuentro con la memoria Kingston de 8 GB, me dijeron que quiza con esta pueda crear el USB con Unibeast. Esperare.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.